Alec's Automotive - Complete Engine Rebuilding

The flow of fuel through your engine is
controlled by the cylinder head & valves.

A level head ensures smooth power
and performance from your engine.

Grind & Polish Valves & Seats
And Replace Valve Seals

By grinding and polishing your valves and valve seats, you can maximize the efficiency of the fuel flow control system and minimize power loss through badly seated or bent valves.

Head surfacing

A smooth level surface on the cylinder head ensures a good seal with the entire surface of the cylinder block.
We can also lower the profile of your head by removing metal from the mounting surface, increasing the compression ratio and power output of your engine.

Seat & Guide Replacement

Valve seats and guides can get burnt out if you have engine trouble. We can cut out the old seats and guides, and replace them with brand new ones, ensuring efficient running of your engine.
We can also replace seats and guides with different metals to allow for natural gas and propane conversions where engine temperatures are higher than normal.

Port Cleaning & Modifications

Intake and exhaust ports are essential to efficient engine operation. We thoroughly clean all the ports on your head using chemical process as well as manual inspection and spot cleaning of carbon buildups.

		The flow of fuel through your engine is controlled by the cylinder head & valves. A level head ensures smooth power and performance from your engine.

Grind & Polish Valves & Seats And Replace Valve Seals		By grinding and polishing your valves and valve seats, you can maximize the efficiency of the fuel flow control system and minimize power loss through badly seated or bent valves.

Head surfacing		A smooth level surface on the cylinder head ensures a good seal with the entire surface of the cylinder block. We can also lower the profile of your head by removing metal from the mounting surface, increasing the compression ratio and power output of your engine.

Seat & Guide Replacement		Valve seats and guides can get burnt out if you have engine trouble. We can cut out the old seats and guides, and replace them with brand new ones, ensuring efficient running of your engine. We can also replace seats and guides with different metals to allow for natural gas and propane conversions where engine temperatures are higher than normal.

Port Cleaning & Modifications		Intake and exhaust ports are essential to efficient engine operation. We thoroughly clean all the ports on your head using chemical process as well as manual inspection and spot cleaning of carbon buildups.